weather station 3d model

Highly accurate engineering 3D model of a portable solar-powered weather station mounted on a tripod. Mechanical constraints (must be followed): The anemometer is rigidly connected to the main vertical pole with a solid shaft, not floating and not broken. The rain sensor (FC-37 type) is mounted at the absolute highest point and is fully exposed to open air, NO protective dome, NO housing covering the sensing surface, and nothing above or around it that could block rainfall. The rain sensor sensing plate is flat, open, and directly facing upward. Sensor placement: Top: fully exposed FC-37 rain sensor (no enclosure). Just below: three-cup anemometer and wind vane, connected with a solid arm and shaft. Middle: ventilated radiation shield containing DHT22 and BMP180 sensors, allowing airflow from all sides. Side-mounted angled solar panel facing outward. Sealed electronics box below the solar panel containing battery, charge controller, microcontroller, and wiring.