3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
monterosso.graphicdesign
05-07 19:12
Model Name
bottle mold 3d model
Tags
3d printing
3d printing realistic
coca
mold
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Highly detailed 3D model of a single-part front mold for a classic contour Coca-Cola style glass bottle. Create a solid rectangular mold block with a deep concave bottle cavity carved into the front face. IMPORTANT: - The Coca-Cola logo must be mirrored/reversed horizontally - The logo must be embossed / raised inside the mold cavity - Raised logo height: approximately 0.8–1 mm - Because the mold is negative, the final cast will display the logo correctly VERY IMPORTANT: - The mold must be COMPLETELY CLOSED at the TOP and BOTTOM - No open ends - No holes passing through the bottle shape - The bottle cavity must terminate inside the block - The mold must be watertight to prevent resin leakage Design requirements: - Deep concave cavity with smooth curvature - Realistic contour bottle proportions - Thick outer walls (minimum 5 mm) - Fully closed back and sides - Fully closed top and bottom - Flat rear surface for stable 3D printing - Rounded internal edges for easier demolding - Slig
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
monterosso.graphicdesign
monterosso.graphicdesignmonterosso.graphicdesign