3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
michalzoladek
01-15 20:39
Model Name
news presenter 3d model
Tags
character
character realistic
character rendering
character rendering realistic
design
news presenter
realistic
rendering
rendering realistic
Prompt
I'll help you design a stable tube holder that meets your specifications. Here's a suggested design approach: Base Design: 1. Triangular or Y-shaped base for stability - Base footprint: approximately 80mm per side - Height: 8mm thick - Rounded corners with 3mm fillets - Slight taper upward from bottom (2-3 degrees) for printability Support Column: 1. Center column rising from base - Width: 30mm at bottom, tapering to 27mm at top - Depth: 25mm - Height: 95mm (to reach specified tube center height) - Front and back faces with 3-degree draft angle - 3mm fillets on vertical edges Tube Holder: 1. U-shaped cradle at top - Inner diameter: 21.2mm (0.2mm clearance for slip fit) - Wall thickness: 3.5mm - Opening width: 19mm (slightly less than diameter for retention) - Support gussets connecting to column - All edges filleted with 1.5mm radius Key Features: - All overhangs kept under 45 degrees - Self-supporting geometry - Parametric design allows for easy adjustment - Adequate wall thickness throughout - Stable three-point base contact Would you like me to clarify any of these design elements before you proceed with modeling?
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
michalzoladek
michalzoladekmichalzoladek