3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1770126574
02-03 13:58
Model Name
gold motor housing 3d model
Tags
machine
3d printing
realistic
Input
Prompt
I need you to remake the gold part, to fit the motor of an eride pro ss 3.0 Outer Diameter: The motor housing is approximately 120mm to 121mm in diameter. Your cover should be slightly larger (around 125mm) to allow for a small air gap. Bolt Pattern: There are usually 3 mounting holes. These are spaced in a triangle on a Bolt Circle Diameter (BCD) of approximately 135mm. The "Offset" (Depth): This is where most prints fail on the SS 3.0. Because of the 18mm heavy-duty belt, you need an internal depth of at least 25mm to 30mm to clear the pulley and belt assembly without rubbing. Center Hole: If you want the motor axle/nut to be accessible, you need a center cutout of at least 22mm.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1770126574
Anonymous1770126574