3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1777134591
07-04 18:47
Model Name
phone stand 3d model
Tags
props
rendering
realistic
Prompt
i w ant to do this hook_body.stl — the C-clamp body. 55×35×84mm. The bottom jaw has a thickened screw boss underneath where the thumbscrew threads in. The rectangular slot (6×4mm) goes all the way through the body — that's your anti-rotation hole, so the hook stays locked in position when you tighten the screw. On top there's a 10mm pivot post with a detent groove so the arm clicks into position. phone_stand_arm.stl — the rotating arm. A hub slides over the pivot post and can rotate 180° (flat against desk vs. upright as stand). At the end is a cradle 80mm wide with side lips, a back wall so the phone leans at 15° for comfortable viewing, and a 14mm wide notch in the base AND the back wall so your charging cable passes through cleanly regardless of cable entry direction. pivot_pin.stl — small pin that drops through the hub and post to lock the rotation at your chosen angle. Has a retention groove at the tip so it doesn't fall out. Pull it out, rotate arm, drop it back in. thumbscrew.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
