3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1782861135
06-30 23:42
Model Name
u shaped bracket 3d model
Tags
3d printing
3d printing realistic
diameter
props
props 3d printing
props 3d printing realistic
props realistic
realistic
shaped
u shaped bracket
Prompt
I want a U shaped bracket. 30mm wide, 30mm deep. The U shape will be defined as two "arms", connected at the "bottom". The gap between the two side of the U is 5mm. There needs to be a screw hole on the side of one of the "arms" of the U. This should be about 5mm from the bottom of the U (Bottom is defined as where the two sides of the U join. This screw hole needs to be threaded. The diameter of the screw hole should be 5-6mm. There needs to be a screw 5-10mm long, with a thread matching the screw hole. The head of the screw should have a head with a hatched pattern so that it can be turned by hand. The head of the screw should be 2-5mm larger than the size of the screw hole. The bottom of the U shape should be 3-4mm thick. The "arms" of the U should be 5mm thick. There is only 1 hole in the U shape. This should be located at the top of one of the arms, centred 5mm from the top in the middle of its width. The U shape should be plain. The
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1782861135
Anonymous1782861135