3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
lailazawawy
01-25 11:27
Model Name
robotic arm rover 3d model
Tags
realistic
rendering
rendering realistic
robotic rover with arm
vehicle
vehicle realistic
vehicle rendering
vehicle rendering realistic
Prompt
i want to do a model for a robot the robot cvontain an arm and a camera on top also i want you to make the body itself transparent in order to see the things inside and its places also it have 2 wheels at the back and a in the front something like a half sphere components: Navigation Sensors Ultrasonic Sensor HC-S04 Accelerometer & Gyroscope MPU6050 IR Photoelectric Encoder Sensor Soil Sensor Labart LNPK107 Soil Sensor Actuators MG996R Servo Motor DC Geared Motor Dual Shaft (3–12V DC, 600 rpm) Water Pump (12V DC Ultra-Quiet Brushless, 240 L/H) L298 Dual H-Bridge Motor Driver (DC and Stepper Motors) Raspberry Pi Components Raspberry Pi 5 (8 GB RAM) Raspberry Pi Camera Module things i should do: 1. Chamber for every part 2. The first chamber is gonna be for the battery. It should have reasonable thickness and there must be an opening from it for the wire of the battery and it should be isolated from all the other components in the robot. 3. The second chamber is gonna be for the motor driver and all the motors together. It should be in the front or in the middle of the robot so that they make a balance for the wheels to move. 4. The third chamber is gonna be on the top of the robot. It’s gonna contain the raspberry pie MCU and a way to connect the camera on the top and the ultrasonic sensor should be in the front. And there also should be a place for the amount that’s gonna be in the front with by the sensor. 5. The last chamber is gonna be in front of the motor driver and the motors for the linear actuator, and it should have an opening so that the implication sensor comes out from it in order to take the readings from the soil 6. Also, there should be a place on the above for the robotic arm and it’s nail M5 7. Finally, a modeling for the wheel itself and I should leave a reasonable space in addition to the size of each thing in order to make it flexible to add things for example, or to remove anything so that it’s not that tight
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
