display frame 3d model

I want you to design a frame for my display. The outer dimensions from the back should be 59 mm in length, 34 mm in width, and 15 mm in depth. The frame should consist of two parts: • Back part: half of the depth (7.5 mm) and closed at the back. • Front part: holds the LCD screen and has a 14 mm wide opening on the right side and a 7 mm wide opening on the left side, so that the circuit board is hidden and only the display area is visible. The openings should extend 1 mm above and below the display. Additionally, the bottom of the frame should have a hinged joint that allows it to tilt forward and backward, and at the end of the joint, there should be a clamp with a default opening of 15 mm, flexible enough to expand up to 30 mm, designed to fit snugly into a keyboard accessory frame. Preferably, the clamp should be attached to the back part of the frame. The frame walls should be very thin but durable, with internal snap-fit features so that all parts assemble securely. The material should be high-quali