3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1772071657
02-26 02:16
Model Name
menorah 3d model
Tags
props
rendering
realistic
Prompt
Make a Menorah or nine pronged candleholder. The base of the menorah should be a truncated cone, with a bottom radius of 45 mm, and top radius of 7.32 mm. The base should be 50 mm tall. There should be a central taller candleholder centered on the top of the base that is 145 mm tall, with eight additional candleholders to the sides of it. All nine candleholders should have a circular radius of 5 mm. Each candleholder should have a socket on the tips, where the walls slightly taper out. The wall thickness for the sockets should be 2 mm. All nine candleholders should be round, with eight stemming horizontally from the central candleholder, and curve around to be vertical at a height even with the central candleholder. The center of each candleholder should be 15 mm apart before the socket taper begins. The socket section should be 30 mm for the central candleholder, and 20 mm for the other eight. The center closest secondary candleholders should be 20 mm from the center of the central ca
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
