3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1763113622
11-14 15:05
Model Name
sensor enclosure 3d model
Tags
3d printing
3d printing realistic
props
props 3d printing
props 3d printing realistic
props realistic
realistic
sensor enclosure
Input
Prompt
make this A modern, compact environmental sensor enclosure that is completely hollow on the inside for electronics. The outer dimensions should be approximately 100 mm wide, 70 mm deep, and 80 mm tall. The device has a smooth, rounded, speaker-like body with soft curved edges and a matte surface. The front face contains a centered rectangular opening for a 0.96-inch OLED display, sized 31 mm wide by 21 mm tall. To the right of the display, include a clearly visible blank rectangular cutout for a temperature and humidity sensor, sized 10 mm by 5 mm. Keep the sensor cutout simple with no grill or extra details. The back side of the enclosure has a large rectangular opening to insert an Arduino Uno vertically; the opening should be clearly visible and measure roughly 70 mm tall and 55 mm wide. The inside of the model must be fully hollow, like a shell, with wall thickness around 3–4 mm. Maintain the same smooth curved aesthetic as the reference images. Ensure the model is manifold and suitable for 3D printing as a single STL shell.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1763113622
Anonymous1763113622