3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
mojitsou
12-10 12:02
Model Name
adjustable desk lamp 3d model
Tags
adjustable desk lamp
props
props realistic
props rendering
props rendering realistic
realistic
rendering
rendering realistic
Input
Prompt
Model a 3D-printable desk organizer with an adjustable lamp. Base layout (left→right): Big pen container: outer 80×80×100 mm; wall 2.5–3 mm; filleted top R3; embossed ‘di WORKS’ logo on front. Small container: 40×80×50 mm; same style. Lamp base: rounded rectangle ~80×180×15–20 mm thick. Add a cylindrical boss Ø30–35×15–20 mm for hinge, plus a 7.5 mm potentiometer hole (optional counterbore). Hinges (3 total: base, elbow, head): M5 pin; holes Ø5.3 mm; fork clearance 0.2 mm per side; wall ≥3 mm. Geometry = single lug in fork (pin goes fork→lug→fork). Printable, assembled with pin. Arms (2 segments): Length ≈210 mm between hinge axes. Semi-cylindrical / semi-conical beams: hinge end ~12 mm thick → taper to 8–9 mm. Generative cutouts with min wall 2.5–3 mm, min opening 6–8 mm, filleted interior corners R≥3 mm. Lamp head (horizontal donut): Ring plane horizontal; axis vertical. Inner Ø31 mm (fixed), outer Ø55–60 mm, height 12–15 mm. Add small vent holes Ø3–4 mm. At outer side of ring, add a cylindrical hub Ø10–12×10–12 mm with through-hole Ø5.3 mm for hinge connection. Arm’s fork clamps this hub using the M5 pin. All parts must be solid, manifold, with printable tolerances.”
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
mojitsou
mojitsoumojitsou