bakery storefront 3d model

Modify the existing NAWAMI BAKERY 3D model into a functional hollow invitation box. KEEP THE EXISTING EXTERIOR EXACTLY AS IT IS. Do not change the facade, windows, black grilles, stairs, signage, proportions, or architectural details. BOX STRUCTURE: - Make the building hollow inside. - Create a clean internal cavity for storing an invitation card. - Use approximately 2.5–3 mm wall thickness. - The interior must be completely empty. - Make the model suitable for 3D printing. HINGED ROOF: - Convert the entire roof/top section into a separate hinged lid. - The lid must open upward approximately 100 degrees. - Place 2–3 small hinges along the BACK edge. - The lid must close flush with the building. - The roof/lid must be a separate movable mesh from the main body. REAL PADLOCK: I will use a real vintage brass padlock with these approximate dimensions: - Height: 37 mm - Width: 22 mm - Body thickness: approximately 6 mm Do NOT create the padlock itself. Instead, create a functional fro