3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
Anonymous1759508085
10-03 18:36
Model Name
hinged shield panel 3d model
Tags
3d printing
3d printing realistic
flat panel
one piece
panel
paneled sides
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Input
Prompt
Create one connected object composed of three required elements: a C-channel, a cylindrical hinge, and a flat panel with a rounded lower edge. These three elements must form one continuous printable part. Do not omit, duplicate, or stylize. Panel (primary element): The panel is flat and planar, not curved or domed. Shape: the top edge is straight and horizontal, while the bottom edge is a smooth semicircular arc, so the outline looks like a rectangle with its lower half replaced by a half-circle. Overall dimensions: width left-to-right ≈ 95 mm; maximum height at the center ≈ 64 mm. Thickness (front-to-back depth): ≈ 2.5 mm across the full area. Surfaces must be plain, smooth, and featureless, with softly rounded (filleted) outer edges. Optionally add a lip ridge along the top edge, where the panel meets the clip and hinge: ridge ≈ 2 mm tall × 2 mm wide, continuous along that edge, to block light leakage. The panel must exist only once — no duplication, no stacking, no secondary plates. Hinge (secondary element): A plain cylindrical pivot axis that connects the clip to the panel. Cylinder diameter ≈ 3.5 mm. Axis runs parallel to the panel’s width (the long 95 mm edge). The hinge is a simple smooth cylinder, no gears, no teeth, no springs, no knuckles. Placement: centered vertically on the rear/top edge of the panel, joining panel to the outer side of the C-channel. C-channel Clip (support element): A slim rectangular C-shaped channel sized to fit over a cap brim. Length along panel edge: ≈ 26 mm. Depth front-to-back: ≈ 12 mm. Internal slot gap in vertical dimension strictly ≈ 3–6 mm (narrow). Two parallel jaws form this slot; each jaw ≈ 2–3 mm thick. Inside faces of both jaws must contain shallow grip ribs: 2–3 ribs per jaw, rounded, each ≈ 0.5–0.8 mm tall and ≈ 1 mm wide, oriented lengthwise. These provide friction without sharp teeth or fabric damage. Exterior surfaces plain, smooth, no cutouts, no textures, no decorative details. Overall constraints: The object must be one manifold: clip, hinge, and panel all fused. Bilaterally symmetrical about a vertical midplane so the part can be flipped left-to-right for reversible use. The hinge must clearly connect the clip to the panel, not float or separate. Style: minimalist, utilitarian, printable engineering part. Absolutely no duplication of panels, no ornamental features, no decorative holes, and no dome-like curves. The result should appear as a slim, flat, rounded-bottom shield panel attached by a small cylindrical hinge to a narrow ribbed C-channel clip sized for a standard brim (3–6 mm).
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1759508085
Anonymous1759508085Anonymous1759508085