3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
arsamaa29
10-03 20:04
Model Name
power bank 3d model
Tags
power bank
props
props realistic
props rendering
props rendering realistic
realistic
rendering
rendering realistic
usb
Prompt
Compact DIY 100W Power Bank – 3D Model Specifications Dimensions: 150mm (L) × 80mm (W) × 40mm (H) Case: ABS or PETG, 2–3mm wall thickness, ventilated top and side slots. Internal Layout: Batteries: Two 30,000mAh Li-Po 7.4V cells, side by side, 12–15mm thick, spaced 5mm apart for heat and insulation. BMS 2S: Mounted close to batteries; short, thick wires (14–16AWG) connect P+/P- to battery terminals. PD Input Module (65–100W): Mounted beside BMS; USB-C input faces rear panel. Ventilation slots above module. PD Trigger Board (5/9/12/15/20V, 100W, 5A): Front of batteries; USB-C output on front panel; optional OLED display (0.96inch) next to USB-C. OLED Display: Front panel, left of USB-C output; shows battery %, voltage, and current. Panels & Ports: Front: USB-C output (PD Trigger), optional OLED, small push button for voltage selection. Rear: USB-C PD input for charging; ventilation holes for airflow. Internal Notes: Wires are thick and neat, routed along edges to avoid short circuits. 5mm spacing between modules and battery edges for heat dissipation. Optional slots for LED indicators near front panel. All modules secured with screws or clips; no loose parts. Design Style: Minimalist, modern, and portable. Clean straight edges with subtle curves for ergonomics.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
arsamaa29
arsamaa29arsamaa29