3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1765300776
01-28 14:36
Model Name
mold tool 3d model
Tags
props
3d printing
realistic
Prompt
. Overall assembled outer dimensions: 200 mm x 200 mm. Total mold height: 50 mm. The design must be split into two separate parts for 3D printing, each part sized to fit on a maximum 180 mm print bed. The two parts must connect together using integrated mechanical connectors (such as tabs and slots, tongue-and-groove, or dovetail connectors) to ensure accurate alignment and strong assembly after printing. When assembled, the two parts must form one rigid, aligned mold with no visible misalignment. The mold must include knife guide slots arranged in a grid, with 6 evenly spaced cutting slots on each side (both X and Y directions). Each cutting slot must be straight, vertical, and sized for a knife blade (recommended slot width 3–4 mm). Important: At the bottom end of every cutting slot, leave a small clearance gap so the slots do not fully separate the mold into individual pieces. The base must remain structurally connected as one solid piece. Include an outer perimeter wall for stability (wall thickness approximately 5 mm). The base must be solid and continuous, suitable for food cutting use. The design must be optimized for 3D printing, with clean geometry, proper tolerances (≈ 0.2 mm), and no problematic overhangs. no colors Ensure connectors are tight-fit but printable without supports.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1765300776
Anonymous1765300776