3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
Anonymous1767898790
02-03 01:30
Model Name
triceratops 3d model
Tags
3d printing
3d printing stylized
creatures animals
creatures animals 3d printing
creatures animals 3d printing stylized
creatures animals stylized
stylized
triceratops
Prompt
Part 1: The Triceratops Body Body Geometry: A stylized, solid-bodied triceratops. The back should be wide and flat enough to accommodate holes. Hole Specifications: Feature 3 deep vertical cylindrical cavities (25mm diameter) cut directly into the back. These must be empty holes, not containing any toothbrush models. Drainage System: Each cavity must have a narrow 'drainage channel' (6mm diameter) extending from the bottom of the cavity through the base of the dinosaur's feet/belly. Part 2: The Drip Tray Design: A shallow, lipped tray that the triceratops sits inside. The tray should be 5mm deep to collect water from the drainage holes. Technical Requirements: Wall Thickness: Ensure a minimum wall thickness of 3mm between the holes and the outer skin for structural integrity. Printability: The bottom of the dinosaur and the tray must be perfectly flat for 3D printer bed adhesion. No internal supports should be required for the vertical holes."
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1767898790
Anonymous1767898790Anonymous1767898790