3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1770351497
02-06 04:23
Model Name
plastic case 3d model
Tags
3d printing
3d printing realistic
plastic case
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Plastic Case Construction Process with Sliding Lid Creating the Outer Frame Sketch a 66 × 46 mm rectangular shape. Round the corners with a radius of 6 mm. Extrude the frame to a thickness of 2 mm. Reducing the Inner Dimensions Offset each edge by 1 mm to create a gap for the module. Extrude the inner dimensions to the module height (30 mm). Adding Screw Holes Sketch Ø2 mm holes in the correct positions as shown in the drawing. Extrude through the wall. Creating the Sliding Lid Groove Sketch a guide groove along the long edge: 2 mm wide, 1.5 mm deep. Extrude to create the groove. Creating the Sliding Lid Sketch a rectangular shape the same size as the frame (66 × 46 mm, radius 6 mm). Extrude 2 mm. Add a small ridge at the edge to act as a stop pin.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1770351497
Anonymous1770351497