3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
Anonymous1784088300
07-15 04:17
Model Name
hollow drain manifold 3d model
Tags
3d printing
3d printing realistic
drain
holes
machine
machine 3d printing
machine 3d printing realistic
machine realistic
realistic
shaped
tubes
Prompt
Print-ready 3D model of a hollow air-gap drain manifold like https://makerworld.com/en/models/1986206-water-softener-discharge-drain#profileId-2137153. Main body is a vertically extruded, wrap around but hollow "stadium" (oval) shell, completely open at the bottom with no floor. At the top, there are three parallel, horizontal, evenly spaced barbed hose inlets pointing outwards. Each inlet is a cylinder with standard barbs sized for 0.5-inch (12.7 mm) ID tubing. Inside the hollow chamber, the lowest edge of the inlet openings sits exactly 2.0 inches (50.8 mm) above the bottom surface of the model to maintain an air gap. Total chamber internal height is 2.5 inches (63.5 mm). Around the entire bottom perimeter of the open oval base, a solid flat flange flares horizontally outward by 0.75 inches (19 mm) to act as mounting feet. The bottom of the flange is perfectly flat to sit flush on a floor drain. No screw holes in the flange. Watertight, clean manifold mesh.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1784088300
Anonymous1784088300Anonymous1784088300