3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
ABDULLAH ALANI
12-17 19:10
Model Name
bench vise 3d model
Tags
3d printing
3d printing realistic
bench vise
machine
machine 3d printing
machine 3d printing realistic
machine realistic
realistic
Prompt
prompt_title: "Ultra-Basic Jewelry Organizer — Tray + Single Upright + Single T-Bar (Monochrome Gray, PLA, Supportless)" style: object_type: "very basic functional jewelry organizer" material_look: "single-color monochrome matte mid-gray" background: "none" text_logos: "none" print_goal: "VERY VERY easy PLA print, supportless, chunky, one-piece" overall_dimensions_mm: footprint: "190 x 130" total_height: 200 max_width: 190 one_piece_structure: concept: "ONE fused part: a tray base with one thick upright and one horizontal bar" underside: "perfectly flat bottom plane" edges: "rounded everywhere, no sharp corners" tray_base: form: "plain rectangle tray" outer_wall_thickness_mm: 6 floor_thickness_mm: 7 tray_wall_height_mm: 24 corner_radius_mm: 16 inner_clear_area_mm: "178 x 118" weight_zone: "solid (not hollow) block under the upright: 60 x 40 x 24 mm" upright_post: form: "single centered post (rounded rectangle)" size_mm: "26 (W) x 18 (D)" height_from_tray_floor_mm: 170 fillet_mm: 8 reinforcement: "two simple gussets on the back side, each 10 mm thick, blended into post and tray" top_bar: form: "single T-bar for necklaces" bar_length_mm: 160 bar_diameter_mm: 22 end_stops: "two simple end knobs Ø26 mm" connection: "bar joins directly into the post with a thick collar (12 mm thick, 18 mm long) + big fillet R10" supportless_rule: "no thin hooks, no pegs, no slots, no bridges" ring_area: placement: "front-left inside tray" form: "simple flat ring block" size_mm: "90 x 45 x 16" grooves: "5 wide U-channels, each 7 mm wide x 6 mm deep, rounded ends" printability_constraints_PLA: nozzle_mm: 0.4 layer_height_mm: "0.24–0.28" supports: "OFF" bridging: "none (no hanging features)" overhang_limit: "≤45° preferred, ≤50° max" min_feature_mm: 1.2 min_wall_mm: 3.0 preferred_wall_mm: "4.0–5.0" perimeters: "5–6" top_bottom_layers: "8–10" infill: "12–18% gyroid" orientation: "print upright on the tray bottom" adhesion: "optional 6–8 mm brim for tall prints" output_requirements: render: "single object, plain and minimal, no background" mesh: "watertight, manifold, one fused part, no separate pieces"
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
ABDULLAH ALANI
ABDULLAH ALANIABDULLAH ALANI