3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
Anonymous1775230879
04-03 20:32
Model Name
tugboat 3d model
Tags
lifeboats
maritime
mooring
realistic
rendering
rendering realistic
tugboat
vehicle
vehicle realistic
vehicle rendering
vehicle rendering realistic
vessel
Prompt
### Revised System Prompt: RITM-200 FPU Exterior Maritime Detail **Subject:** High-fidelity 3D asset of the **PEB-106 (RITM-200S) Floating Power Unit**, focusing on maritime engineering, hull structural integrity, and external industrial outfitting. **1. Hull & Main Deck Architecture:** * **Vessel Type:** Non-self-propelled, heavy-lift industrial barge. * **Dimensions:** 144m Length, 30m Beam, 10m Depth to Main Deck. * **Hull Form:** Ice-class reinforced "Arc5" bow; flat-bottomed hull with bilge keels for stability; double-sided and double-bottom construction. * **Deck Layout:** High-clearance main deck. The central section is dominated by the **Reactor Compartment Block**, a windowless, reinforced steel enclosure with heavy-duty bolted access hatches. **2. Mooring & Station-Keeping Systems:** * **Rigid Mooring Device (RMD):** Integrate four massive lateral "arm" attachment points (two per side) designed for a "soft mooring" system to allow for 5-meter tidal variations. * **Anchoring:** Heavy-duty windlasses at the bow and stern; four 15-ton anchors with visible chain hawse pipes. * **Fendering:** High-impact rubber D-fenders lining the waterline for tugboat positioning. **3. Superstructure & Living Quarters:** * **Fore-Aft Blocks:** A 4-story white modular accommodation block at the bow for a 80-person crew. * **Bridge/Control Center:** A non-navigational raised control room with wrap-around reinforced glass overlooking the main deck. * **Helipad:** A raised, circular octagonal landing platform at the stern with "H" marking and perimeter safety netting. **4. Industrial Outfitting & Power Export:** * **Gantry Cranes:** Two overhead rails running the length of the reactor block for maintenance and refueling. * **Piping & Venting:** Massive external ventilation stacks (funnels) for emergency steam release and HVAC. * **Power Take-off:** A dedicated "High Voltage Gallery" on the starboard side featuring heavy-duty busbars, transformers, and articulated cable arms for shore-grid connection. * **Life Support:** Fully enclosed orange gravity-launch lifeboats mounted on port and starboard davits. **5. Material & Surface Finish:** * **Texture:** Weathered maritime paint; "Ice White" superstructure, "Signal Red" below the waterline, "Basalt Gray" main deck. * **Details:** Add weld seams on the hull plates, rust-streaking near the scuppers, and non-slip checkered plating on all walkways.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1775230879
Anonymous1775230879Anonymous1775230879