3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
backus13
10-03 18:28
Model Name
clip-on blinder 3d model
Tags
3d printing
3d printing realistic
cropped
hinged lid
panel
props
props 3d printing
props 3d printing realistic
props realistic
realistic
rounded corner
Prompt
Create one minimalist, functional clip-on blinder designed for a baseball cap brim. It must be a single reversible part, not decorative. The design is composed of three clear elements: clip, hinge, and shade panel. All three must be included as one connected geometry. Do not omit any of these parts. Shade Panel (primary feature): The panel is the main element and must dominate the shape. It is tapered, not a rectangle. This taper is mandatory. Rear edge (temple side) height: ~64 mm. Front edge (nose side) height: ~45 mm. Length along brim edge: ~95 mm. Width front-to-back: ~55–60 mm. Thickness: ~2.5 mm. Surfaces must be perfectly flat and smooth, not curved, not domed. Edges should be softly rounded (filleted) for comfort and printability. Optional lip: add a small straight ridge along the inner brim edge of the panel, ~2 mm tall x ~2 mm wide, to block light leaks. The taper should be visible in side view as a trapezoid: tall at the back, short at the front. Hinge (secondary feature): A plain cylindrical friction hinge, not gears, not latches, not knuckles. Cylinder diameter: ~3.5 mm. Hinge axis runs parallel to the brim edge. The hinge connects the outer side of the clip to the side of the panel. Function: allows panel to rotate down beside the eye or fold up flat against the brim. Must be visually obvious that the hinge joins the clip and the panel. Clip (support feature): A slim C-shaped clip, not bulky. Length along brim: ~26 mm. Depth front-to-back: ~12 mm. Inner slot gap: 3–6 mm only (narrow). Jaws: 2–3 mm thick each. Inside surfaces: add 2–3 shallow ribs per jaw. Each rib ~0.5–0.8 mm tall, ~1 mm wide, running front-to-back. These ribs increase friction on the hat brim. They must be rounded, not sharp teeth. Outside surfaces smooth, plain, no textures, no ornament. Overall requirements: Geometry must be one single connected part: clip + hinge + tapered panel. The part must be reversible: can be used left or right simply by flipping. The overall style should be slim, utilitarian, engineering-like, printable in PETG. No decorative textures, logos, or extra geometry. No duplication of panels — exactly one panel. No large dome shapes or helmet-like curves. No gear teeth or serrations on hinge. The result should look like a slim, tapered flat shield attached by a hinge to a narrow clip, sized correctly to snap onto a standard baseball cap brim (3–6 mm thick).
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
backus13
backus13backus13