cpu cooling assembly 3d model

# SOLIDWORKS GUIDE # Project: Uneven Airflow Distribution in CPU Cooling System --- # OBJECTIVE Design a complete CPU cooling assembly in SolidWorks for: - CFD Analysis - Thermal Analysis - Structural Analysis - Airflow Simulation - Heat Sink Optimization --- # FINAL ASSEMBLY COMPONENTS 1. CPU Block 2. Heat Sink Base 3. Heat Sink Fins 4. Cooling Fan 5. Airflow Duct 6. Cabinet Section 7. Mounting Supports --- # RECOMMENDED DIMENSIONS | Component | Dimension | |---|---| | CPU Block | 40 × 40 × 5 mm | | Heat Sink Base | 80 × 80 × 8 mm | | Fin Height | 35 mm | | Fin Thickness | 2 mm | | Fin Spacing | 4 mm | | Fan | 80 × 80 × 25 mm | --- # MATERIALS | Component | Material | |---|---| | CPU Block | Copper | | Heat Sink | Aluminum 6061 | | Fan Housing | ABS Plastic | | Frame | Mild Steel | --- # STEP 1 — CREATE CPU BLOCK ## Procedure 1. Open SolidWorks 2. File → New → Part 3. Select Top Plane 4. Create Sketch 5. Draw Rectangle: - 40 mm × 40 mm 6. Exit Sketch 7. Features → E