3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
psquad21
07-26 17:08
Model Name
metal pen tray 3d model
Tags
props
props realistic
props rendering
props rendering realistic
realistic
rendering
rendering realistic
tray
xy plane
Prompt
Step 1 — Outer Profile Create a sketch on the XY plane. Rectangle: Length: 185 mm Width: 135 mm Apply: Corner fillets: R8 mm Step 2 — Extrude Base Extrude: 23 mm This creates the outside body. Step 3 — Hollow Interior Shell operation: Remove inside volume. Settings: Wall: 2.4 mm Bottom: 2.8 mm Internal cavity: Length: 180.2 mm Width: 130.2 mm Depth: 20.2 mm PEN TRAY RAILS The tray will sit above the base floor. Rail height: 8 mm Rail thickness: 2 mm Position: Centered left/right. Clearance: 0.3 mm each side. PEN TRAY LOCATION The tray sits: 4 mm above the base floor Leaves an air space beneath Allows condensation channels Cross section: Lid ----------------- Pens OOOOOOOO Pen Tray ================= Air Gap ----------------- Base _________________ COLD PACK BAY Location: Opposite side of pen tray. Dimensions: Cold Pack: 160 × 60 × 10 mm Pocket: 161 × 61 × 11 mm Clearance: 0.5 mm
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
