3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
sr
10-19 12:55
Model Name
tablet wall mount 3d model
Tags
3d printing
3d printing realistic
backplate
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Prompt
Create a minimalist wall mount for a Samsung Galaxy Tab A9 with the following specifications: Tablet dimensions: 257.1 mm (width) × 168.7 mm (height) × 6.9 mm (depth) The front must remain fully open, showing the entire tablet screen. The mount is a thin backplate with three retaining edges: bottom, top, and right side only. The bottom edge should cover 80% of the tablet’s width (centered, leaving 10% open on each side) and be 8 mm tall. The top edge should cover 60% of the tablet’s width, also centered, and 6 mm tall. The right side edge should run the full height, 10 mm wide, slightly thicker to hold the tablet securely. The left side must be completely open, so the tablet can slide in from the left. Wall thickness of the backplate: 2 mm. Front lips (edges) thickness: 3 mm. Backplate should have a cable passthrough hole in the center, 25 mm diameter. The mount should be ultra thin, total depth ~9 mm (2 mm wall + 6.9 mm tablet). Include two mounting holes (4 mm) near top corners of the backplate for wall screws. The style should be modern, minimalistic, rounded corners (radius 4 mm), and matte black finish. Export a watertight STL model ready for 3D printing.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
sr
sr