3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
Anonymous1774648324
03-27 21:58
Model Name
water tank 3d model
Tags
3d printing
3d printing realistic
props
props 3d printing
props 3d printing realistic
props realistic
realistic
water tank
Prompt
Technical Specifications: Dimensions: The main body should be a rectangular prism measuring 8.0 inches (Length) x 5.0 inches (Width) x 9.0 inches (Height). This provides a volume of approximately 360 cubic inches (~1.5 gallons total capacity, 1.1 gallons usable). The Sleeve (Critical): Model a vertical hollow cylindrical cutout (sleeve) through the bottom of the tank to accommodate a 1.25-inch diameter, 1.5-inch tall post. The center of this sleeve is 2.25 inches from the short wall, perfectly centered on the width. Ensure the sleeve walls are 3mm thick to prevent leaking into the post area. The Vacuum Seal: The bottom of the tank must be completely sealed except for one 0.75-inch circular drainage hole. Elevation: Add four 1.25-inch tall reinforced corner legs. These legs must suspend the bottom of the tank 1.25 inches above the basin floor. This ensures the drainage hole is positioned just below the basin's top rim to prevent overflow. Refill Point: On the top surface, include a 1.5-inch diameter threaded neck for a screw-on cap. Wall Thickness: Specify a uniform wall thickness of 4mm for structural integrity under the weight of 1 gallon of water (~8.3 lbs). Finish: Apply a 0.5-inch radius fillet to all vertical corners and a 0.25-inch fillet to the top edges to reduce stress points."
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1774648324
Anonymous1774648324Anonymous1774648324