payment terminal 3d model

The device's right profile features an ergonomic grip shape that slopes slightly from front to back; the outer coating is matte black rubberized with a narrow channel running along a slightly curved surface in the center. Two long rectangular buttons (each surrounded by a thin edge protrusion) are placed vertically in the center of the side surface, and further back, parallel to the upper half of the device, there is a narrow, rounded-edge card or chip slot. The case has thin sealing joints at the joints and solid-feeling dark gray hard plastic reinforcement panels. On the left side, there is a horizontal card or expansion slot opening (approximately one-third the length of the screen height) near the front face and two cross-head screws screwed into the upper rear corner; the left edge tapers smoothly towards the rear, and a rough, finely lined rubber surface transition begins at the point where it joins the rear grip. The top section features a slightly raised, round area or small cover bearing the NFC symb