3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1760798253
10-18 18:58
Model Name
flower chandelier 3d model
Tags
props
3d printing
realistic
Input
Prompt
The following changes need to be made to my existing chandelier 3D model: Keep the same appearance and design of the chandelier — only technical finishing is done for functionality. On the upper central part (top) make a hole Ø42 mm (radius 21 mm) for E27 socket (bulb socket). Inside that hole, add a thin ring / seat (thickness about 3 mm, height about 3 mm) immediately 1 mm below the edge of the hole, so that the shade ring from the E27 socket can be tightened and hold the shade. Remove the existing bulb and cables from the model — only the clean body of the chandelier should remain, ready to install the standard socket and cable later. At the very top above the opening, a small opening of 6–8 mm can be left for the passage of the power cable (optional if they want). The dimensions of the entire chandelier should be 34 × 34 cm (width × length), as originally planned. The model should be ready for 3D printing, with a closed (manifold) mesh and a wall thickness of about 2.5–3 mm
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!