3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1777276339
05-18 07:40
Model Name
expansion hook 3d model
Tags
props
3d printing
realistic
Prompt
The Prompt: "Design a two-part 3D printable 'Expansion Hook' for fluted/slat cladding walls using a 1unit = 10mm scale. The assembly must consist of: A Main Body: A 30mm x 50mm x 3mm front plate. On the back, two vertical fins (35mm tall, 12mm deep) spaced 15mm apart to fit into a cladding channel. The interior faces of these fins should be slightly tapered to act as a ramp for a wedge. The Mechanical Slider: A central vertical wedge that sits between the fins. It should feature a small, ergonomic lever/tab at the top. When the slider is pulled downward towards the base of the device, the wedge must force the two fins outward laterally to create a friction lock against the channel walls. Utility Hook: A forward-facing hook at the bottom of the front plate, 10mm deep with a 5mm upward lip, designed to hold picture wire. Tolerances & Materials: Provide 0.2mm clearance between the slider and the fins for smooth movement. Design the exterior of the fins to be flat to allow for the applic
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1777276339
Anonymous1777276339