rainwater filtration 3d model

This is a standalone DIY rainwater filtration + slow-release soakaway system. No building or house visible — focus only on the plumbing and tanks. Show a vertical downpipe coming down from above (cut off at the top). The downpipe feeds into a 'flush filter' (first-flush diverter) that discards the initial dirty water. Clean water then flows into a horizontal filtration chamber filled with layers: gravel at the bottom, sand on top. Water slowly percolates through. From the filter outlet, water drips into a cylindrical drum/ chamber partially buried in the dirt/soil. Inside the drum: geotextile fabric lining the bottom and sides, with a gravel layer at the base. The drum has a removable lid on top. At the very bottom of the drum there’s a small hole that slowly releases the filtered water into the surrounding ground (soakaway). Use realistic materials: PVC pipes, plastic or metal drum, visible sand/gravel layers, natural soil with grass on surface. Make a clean cutaway view on the filter