3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1741703840
10-13 23:10
Model Name
coral lamp 3d model
Tags
3d printing
3d printing realistic
coral lamp
coral pink
coral shaped
fabric lampshades
props
props 3d printing
props 3d printing realistic
props realistic
realistic
Input
Prompt
Generate two distinct 3D models that fit together perfectly to form a coral-shaped lamp, based on the attached image. Both models must be solid, ready for 3D printing in PLA, with closed, manifold meshes without errors, and designed for support-free FDM printing. The overall aesthetic should faithfully recreate the organic, branched coral structure and light diffusion as seen in the reference image. Model 1: The Coral Shade (Pantalla) Form & Structure: This model represents the thin-shelled coral shade. Its overall diameter will be 15.5 cm. Base Recess: The bottom of the coral shade must have an internal recess or lip designed to perfectly fit onto the separate lamp base, creating a seamless joint. Visible Height: When assembled, the coral shade will obscure most of the base, allowing only 1 cm of the base to be visible below it, as depicted in the image. Coral Branch Start: The coral branches should begin to emerge from the shade's structure starting at 1.5 cm from its bottom edge. Overall Height: The tallest point of the coral (the highest branch) will reach an overall lamp height of 40 cm from the bottom of the base when assembled. Other branch heights are variable to maintain organic form. Central Separation: In the center, the coral structure must separate from the base by approximately 6 cm to accommodate the bulb and holder, allowing for airflow and access. Bulb Coverage: The coral branches must enclose the bulb space, hiding it from direct view from any top angle, but allowing light to diffuse through the structure. Output Format: Output this model as Coral_Shade.STL. Model 2: The Lamp Base (Base) Form & Structure: This model is the functional base for the lamp. Its total diameter will be 15 cm. Shade Connection: The top perimeter of the base must feature an external lip or ridge designed to perfectly accept and engage with the internal recess/lip of the Coral Shade model, ensuring a secure and flush fit. Visible Height: The base has a total height of 6 cm, but when the shade is attached, only 1 cm of its exterior height will be visible above the table, matching the reference image. E27 Holder Cavity: A central cylindrical cavity for an E27 lamp holder must be incorporated. The internal diameter for the holder should be 40 mm. This cavity should extend downwards from the top surface of the base to accommodate the holder. Output Format: Output this model as Lamp_Base.STL. Assembly and Printing Considerations for Both Models: Both models must be designed with support-free FDM printing in mind. The joint between the shade and the base must be designed for a snug, friction fit or allow for easy assembly (e.g., using a small amount of adhesive if desired). Ensure precise scaling and alignment so both parts can be printed and assembled seamlessly.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1741703840
Anonymous1741703840