3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
jangcne0202
10-19 04:28
Model Name
compass keyring 3d model
Tags
3d printing
3d printing realistic
dial
disc shaped
platter tonearm
props
props 3d printing
props 3d printing realistic
props realistic
realistic
rotating
two turntables
Prompt
Create a minimal “Play Compass” rotating keyring as a clean studio-grade 3D model. Output intent: - ONE GLB/OBJ scene with TWO clearly separate meshes named “Base_Body” and “Top_Dial”. - Z-up, centered at world origin, real-world scale (about 38 mm overall diameter). - Watertight, manifold geometry; clean quads; no self-intersection; soft fillets everywhere. Form & function: - Two stacked circular plates with a thin visible gap between them (the dial rotates over the base). - BASE_Body (lower disk): slightly larger diameter, matte ABS-like white. A very shallow protective rim around the dial, a tiny triangular indicator on the rim at 0°, and a reinforced round keyhole boss near the edge with a clean through hole (~3.8 mm). On the top surface, a circular array of 12 tiny hemispherical detent pits, evenly spaced every 30°. On the back, add 2–3 shallow “anti-stud” recess rings as a subtle LEGO-like hint. - Top_Dial (upper disk): slightly smaller diameter, matte ABS-like plastic in a single vivid color (choose ONE: red #D40000 or yellow #FFD400 or blue #0067A3). On the underside, place ONE small hemispherical detent bump positioned to ride over the 12 pits for a gentle “click” at each 30° step. On the top face, arrange 12 short words around the outer circumference, one per 30°: IMAGINE, CREATE, LEARN, FUN, BUILD, PLAY, SHARE, CARE, DREAM, FLOW, THINK, SMILE. Keep the words shallow (engraved ~0.6 mm or embossed ~0.5 mm), neat and readable. - Optional brick cues: add four tiny low-profile “stud-like” grip nubs on the dial edge at 12/3/6/9 o’clock; keep them subtle so text remains readable. Shading/material: - Matte ABS-like plastic; no metal parts; no over-gloss; soft highlights only. Topology & presentation: - Clean, balanced proportions suitable for 3D printing and product visualization. - Ensure the two parts are distinct sub-meshes with a visible separation line (0.2 mm look-gap), so they can be exported and manipulated independently. Avoid (negative): logos, trademarks, stickers, decals, screws, exposed hinges, metal parts, sharp edges, noisy or bumpy textures, distorted proportions, non-manifold mesh, merged single mesh that cannot be separated
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
jangcne0202
jangcne0202jangcne0202