3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
Anonymous1773505370
03-14 17:31
Model Name
wood relief panel 3d model
Tags
3d printing
3d printing historical
character
character 3d printing
character 3d printing historical
character historical
cross
historical
relief panel
Prompt
{ "type": "text_to_model", "model_version": "v2.5", "prompt": "THIS IS A 2.5D CNC HEIGHTMAP RELIEF PANEL, NOT A SCULPTURE OR STATUE. A solid rectangular wooden slab where the back face is perfectly flat at Z=0mm and the front face has varying carved heights. For every XY position on the panel there is exactly ONE Z height value, like a terrain elevation map. A CNC milling bit approaches only from directly above — therefore NO overhangs, NO undercuts, NO hollow cavities, NO geometry where a lower Z value exists beneath a higher Z value at the same XY position exist anywhere in this model. If water were poured from above every surface would drain freely — no bowls or trapped pockets anywhere. Z HEIGHT LAYERS: Z=28mm foreground face and chest of Damien; Z=22-26mm body arms cassock fold ridges; Z=16-20mm patient figure and church front; Z=10-14mm middle ground rocks; Z=6-9mm Kalaupapa lava plain and cliff base; Z=3-5mm ocean wave ridges; Z=1-2mm sky cloud bumps; Z=0mm flat back board. CENTRAL FIGURE: Father Damien de Veuster, stocky Belgian missionary priest, standing front-facing. He wears the black cassock habit of the Congregation of the Sacred Hearts — heavy fabric with deep vertical fold ridges running continuously top to bottom like parallel mountain ridges, each fold a ridge with adjacent valley, all folds continuous from collar to hem with no fold ending in midair, center button placket with each button a small convex dome bump on the cassock surface. Wide-brim black missionary hat: the brim is a flat horizontal raised platform at high Z, its outer edge drops as a vertical carved wall to the lower Z of the face below — the underside of the brim does NOT exist as geometry, it is simply the sloped wall transitioning to face level — no overhang. Face fully anatomically carved as ridge and dome terrain: forehead brow ridge as a horizontal raised ridge, nose as a central vertical ridge rising from face plane with carved alar wing flanges and shallow nostril depression, cheekbones as raised dome areas, eyes as small convex hemispherical dome bumps sitting proud of cheek surface with carved groove lines above and below each dome for eyelids — NO eye socket cavity behind the eyeball dome, the eyeball dome simply rises from the face surface. Beard as dense field of parallel fine ridges radiating from chin and jawline. Ears as a layered set of curved ridges on side of head, outer helix as highest ridge, inner ridges progressively lower, no deep canal cavity. Right hand extended palm up: five fingers as five parallel raised ridges on hand surface, each ridge with carved transverse knuckle bumps, each fingertip with carved nail plate ridge — NO gap or cavity under fingers, fingers are ridges on the palm terrain surface. Left hand holds a Latin cross: cross is a T-shaped raised ridge platform on the cassock surface, vertical shaft ridge and horizontal crossbar ridge crossing it, both ridges have carved side walls descending to cassock surface — cross merges fully into cassock surface with no gap or space beneath it. Feet visible below cassock hem in simple sandals: toes as small parallel rounded ridges on foot surface, sandal straps as narrow raised band ridges crossing over toes. Face shows early leprosy nodules as gentle rounded dome bumps on brow and cheeks — raised terrain bumps not hollows. LOWER FOREGROUND: Hawaiian leprosy patient seated at Damien feet, a raised terrain area connected to ground plane, body as interconnected raised dome and ridge forms, face tilted upward with same carved ridge and dome anatomy, bare hands reaching up with finger ridges, ragged clothing as irregular ridge and valley texture, entire figure merges via smooth slope transition into the surrounding ground plane terrain. MIDDLE GROUND: Small wooden colonial Saint Philomena church building to the right of center — a solid raised rectangular block terrain feature like a house-shaped plateau, roof as triangular prism ridge on top of rectangular block, walls with horizontal plank lines as shallow parallel carved grooves on face surface, window openings as shallow carved rectangular depressions 4mm deep NOT holes through panel, bell tower as narrower taller raised block, cross on roof ridge as small T-shaped raised ridge bump, all walls taper via sloped terrain transitions back to ground plane. BACKGROUND: Left and upper area — Molokai sea cliffs as a tall near-vertical raised terrain wall with horizontal geological strata lines as shallow parallel carved grooves and vertical crack lines as narrow incised grooves, cliff top edge highest background point at Z=8mm. Right lower area — Kalaupapa peninsula as low flat lava plain terrain at Z=6mm with irregular volcanic surface texture of small bumps and crack grooves. Ocean foreground below cliffs — parallel horizontal wave ridges at Z=3-5mm, each wave crest a rounded ridge, wave troughs shallower areas between ridges, all continuous undulating terrain. Sky area upper panel — nearly flat terrain at Z=1-2mm with shallow rounded cloud dome bumps scattered across surface, carved rays of light as shallow parallel groove lines radiating diagonally from upper left corner between cloud bumps. BORDER: Rope-twist carved border framing full panel perimeter as a continuous raised ridge with diagonal groove crossings along its length forming helical rope appearance, corner rosette bumps with carved petal lobes, bottom center rectangular cartouche plateau with incised raised letter ridges spelling PATER DAMIANUS. STYLE: Flemish Baroque church wood altar relief panel, 19th century woodcarving craftsmanship, dramatic Z-depth contrast between foreground and background, every detail rendered as real carved ridge dome and valley terrain geometry, fine chisel mark texture across all carved surfaces, matte wood grain, no color, monochromatic, single solid unified mesh object with perfectly flat bottom face at Z=0.", "negative_prompt": "freestanding statue, figurine, sculpture in the round, 360 degree model, hollow mesh interior, overhang geometry, undercut where lower Z exists beneath higher Z at same XY, hat brim with modeled underside cavity, hollow armpit cave between arm and body, eye socket cavity behind eyeball, cave under nose bridge, hollow under clothing folds, floating cross disconnected from body, floating separate mesh islands, disconnected geometry pieces, rounded back face, curved base, pedestal, separate base plate, color, PBR materials, glossy surface, specular highlights, window holes through full panel thickness, cartoon, modern style, abstract, low polygon, blobby soft geometry, missing hat, missing cassock, missing cross, missing patient, missing church, missing sea cliffs, missing ocean", "texture_quality": "detailed", "pbr": false, "quad": false, "face_limit": 1400000, "compress": false, "smart_low_poly": false, "generate_parts": false, "auto_scale": true }
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1773505370
Anonymous1773505370Anonymous1773505370