3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1782829158
06-30 14:27
Model Name
upright frame 3d model
Tags
3d printing
3d printing realistic
props
props 3d printing
props 3d printing realistic
props realistic
realistic
vertical supports
Prompt
Upright printed tower frame ~120(X)×330(Y)×135(Z)mm. Two side plates: each 330 tall × 135 deep × 5mm thick, parallel, 110mm apart inside; each has two Ø22mm bearing bores 180mm apart vertically (lower bore in an 8mm vertical slot), with ≥6mm solid border around bores/edges and optional lightening cutouts elsewhere. Base plate 150×150×5mm; side plates stand vertically on it via locating slots. At least 4 printed cross-bars join the plates at the corners only (M3 into heat-set inserts, Ø4.0–4.2mm holes), clear of the central area. Five platforms: floor 80mm long (X) × 78mm deep (Z) × 2.5mm thick, with a 3mm-tall × 2mm perimeter curb, a center divider rib (3mm×2mm) making two bays, a 6mm rear wall, an open chamfered front edge, and two 4mm-thick side arms angling inward to a pivot boss 30mm above the floor with a Ø6mm coaxial hole. Print side plates and base flat, platforms floor-down; 0.2mm fits; supports only under the arms.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1782829158
Anonymous1782829158