3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
Anonymous1784756944
07-22 21:59
Model Name
signet ring 3d model
Tags
3d printing
3d printing realistic
props
props 3d printing
props 3d printing realistic
props realistic
realistic
resin printing
signet ring
Prompt
Using the attached reference image, recreate only the ring shown. Do not redesign or reinterpret it. Generate one watertight, manifold, production-ready 3D model for resin printing and lost-wax casting. Create a men's US size 9.5 signet ring with a 19.2 mm inside diameter and comfort-fit interior. The signet face must be a softly domed rounded rectangle measuring 20.0 mm wide × 12.0 mm tall with smooth, continuous transitions into thick tapered shoulders. The bottom of the shank should be 4.5 mm wide and approximately 2.5 mm thick with a minimum wall thickness of 1.5 mm. Create one centered rounded-square pilot opening measuring exactly 5.0 × 5.0 mm completely through the face. Add one centered rear gallery opening measuring approximately 4.2–4.5 mm square aligned with the pilot opening. Do not create a gemstone seat, bezel, prongs, or gemstone. Leave enough metal so a jeweler can cut the final seat for a 6.0 mm square or Asscher-cut stone after casting, Add a sprue
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1784756944
Anonymous1784756944Anonymous1784756944