3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
Anonymous1773606717
03-16 04:04
Model Name
arrow display 3d model
Tags
3d printing
3d printing realistic
backplate
props
props 3d printing
props 3d printing realistic
props realistic
realistic
wooden
Prompt
wrong Create a 3D-printable STL model of a decorative arrow support hook designed to hold a 10 mm diameter arrow horizontally as part of a wooden trophy display. Design specifications: Backplate Rectangular backplate: 1.5 inches wide × 1.0 inch tall Thickness: ~0.2 inches A single countersunk screw hole located at the center of the backplate for mounting to wood Hole sized for a typical #6 wood screw with a countersink Support Beam At the bottom center of the backplate, create a square beam extending outward Beam cross section: 0.25 inches × 0.25 inches Beam length: 1.5 inches Beam angle: 45 degrees upward from the bottom of the backplate Arrow Holder At the end of the beam, create a U-shaped cradle for holding a 10 mm arrow shaft The cradle opening should face upward The cradle axis should be perpendicular to the backplate so the arrow sits horizontally across the wall Internal diameter slightly larger than 10 mm (≈11–12 mm) to allow clearance printing on my prusa
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1773606717
Anonymous1773606717Anonymous1773606717