3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
bryon.s.graves
09-18 16:48
Model Name
funnel 3d model
Tags
3d printing
3d printing realistic
blade shaped
cone shaped
funnel
lid curved spout
lip shaped
props
props 3d printing
props 3d printing realistic
props realistic
realistic
vtuber
Prompt
You are creating a single-piece funnel adapter that is fully hollow only through the central bore where liquid or air flows. The funnel’s walls should be a continuous solid thickness of about 3–4 mm, without any gaps, cavities, or separation between inner and outer layers. The yellow zone in your preview should not exist; instead, the inside surface of the funnel and the outside surface should be directly connected, forming one uniform shell. At the wide mouth, the funnel must include a reinforced attachment lip (red mark) that is made thicker than the rest of the wall for strength and durability. This lip is the only feature that protrudes beyond the continuous taper of the funnel body, and it provides the snap-fit connection to the Korky overflow pipe. From the lip, the funnel should taper smoothly and quickly over a short height before transitioning into a straight insertion sleeve sized to slide firmly into the base hole of the original STL. The overall design must avoid any unintended internal layers or voids, resulting in a clean, strong, and manufacturable funnel part.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
bryon.s.graves
bryon.s.gravesbryon.s.graves