180mm 3D Models

Find the best 180mm 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Anonymous1776273738

首先生成一个竖立的直直的圆筒，中间是空的，直径30毫米，长度180毫米，厚度2毫米，以X轴Z轴的平面沿着它纵向的中轴将它切开，删除里面的那一半

Anonymous1773561061

首先生成一个直直的圆筒，中间是空的，直径30毫米，长度180毫米，厚度2毫米，沿纵向的中轴切开，分成两半，取其中的一半，圆弧面朝上放在地上

Anonymous1773561061

Anonymous1761692218

Square to round ventilation duct transition, square inlet 150mm x 350mm, round outlet diameter 180mm, sheet metal structure, smooth transition, industrial design, clean geometry, no holes, white matte texture, orthographic view, high detail, seamless mesh, ready for 3D printing

Anonymous1772246534

i have 300mm circle mold. i need 3mm reinforcement around, but my printer can only print 200mmX200mm so it needs to be from multiple connecting parts. height of 18mm. i need simple circle divided to 4 parts with ears so i can clamp them

Anonymous1771584522

Cabinet for electronics, h=40mm w=180mm d=140mm. With inverted trapezoid foot’s base dimensions 10x10 mm. Panels rear and fron mounted to the cabinet with 3mm hex screw on each corner. On upper side pockets for inverted trapezoid foots if I would like to add additional cabinet with different electronic

Anonymous1771529147

the baseplate is 180mm x 150mm and is 8mm thick. The elongated slots and the four circular holes are 6mm. all of the pieces need to be connected. Do not add anything to the model. make the model ready to 3d print. make it look exactly like the image

Anonymous1770681706

the baseplate is 180mm x 150mm and is 8mm thick. The elongated slots and the four circular holes are 6mm. the triangle vertical supports height is 70mm, base width is 15mm and thickness is 5mm and it includes circular holes on the triangle that is 8mm. all of the pieces need to be connected

Anonymous1770681706

create a pan 180mm x 180mm with a rim around the pan 10mm high, total thickness of the pan 2mm

Anonymous1767545532

honda xr400 headlight cover
Dimensions: 180mm total width, 145mm height; headlight aperture 108mm x 70mm with 3.5mm wall thickness.
Mounting: Top slots spaced 78mm center-to-center; bottom pins spaced 110mm apart for lower bracket fitment.

keep the body in contact shape and watch out for small mistakes and problems Dimensions: 180mm total width, 145mm height; headlight aperture 108mm x 70mm with 3.5mm wall thickness.
Mounting: Top slots spaced 78mm center-to-center; bottom pins spaced 110mm apart for lower bracket fitment.

keep the body in contact shape and watch out for small mistakes and problems

Anonymous1768512809

a 6mm thick rectangular plate measuring 200mm x 180mm with 6 symmetrical, 2mm deep indentations for circular objects of 40mm radius.

Anonymous1768202368

Anonymous1766832761

Anonymous1764547470

A rectangular slab of hard tool plastic or aluminum. Its overall dimensions are 222mm in length, 152mm in width, and 20mm in thickness. (Note: 因为图纸比例为1:2，所以实际尺寸111x76x10需乘以2输入，以生成合适大小的模型供缩放)。

On the top face, there is a large rectangular recess. This recess is centered on the slab. The recess has a length of 180mm, a width of 112mm, and a depth of 14mm. (对应图纸顶部7.0深槽，尺寸90x56x7，放大2倍)。

The slab has four through holes for mounting, located near each corner. These holes have a diameter of 6mm (对应图纸3.00孔径，放大2倍)。 The edges of the entire slab are slightly rounded (broken edges), not sharp.

Engineering drawing style, solid, no textures, white background, isometric view.A single, small rectangular protrusion or block, made of hard plastic. Its top dimensions are 18mm in length and 9mm in width (对应图纸9.00 x 4.50 TYP，放大2倍)。 The vertical sides have a draft angle, meaning the base is slightly larger than the top. The height of the block is 6mm (对应图纸3.00高度，放大2倍)。 All four vertical edges of the top are rounded with a small

Anonymous1745809963

disco com 1mm de espessura por 180mm de diâmetro com furos de 1mm de diâmetro por toda a peça com margem de 50mm da borda do circo maior

Anonymous1763334515

-Criar uma base circular no diâmetro de 180mm, com altura de 50mm, nas laterais desenhos que remetem ao natal em alto relevo.
-A base deve ser oca, pois dentro deve conter um local para colocar uma fan de 120mm por 120mm com 25mm de altura .
-A parte superior da base circular deve se toda preenchida com furos de 1mm de diâmetro para circulação do ar .
-A base deve ter também um furo de 11,5 mm de diâmetro .
- Na parte inferior da base deve haver uma tampa para dar acesso a Fan e ao circuito

Anonymous1763334515