View Plans

Width 3D Models

Find the best Width 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :
dimensionsheight5mm12cm5cmcuboid12mm16mm180mm4 inch
modular cube frame 3d model: Import your reference sketch or measurements You can drag in your notebook photo or enter the dimensions manually: Width: 216 mm Length: 251 mm Height: 21 mm Create the base block Use the “Box” primitive. Set the outer dimensions above. Hollow the box Add a second box inside and subtract it (use “Boolean Difference”). Inner dimensions: 210 × 245 × 18 mm. Add rod holes Insert cylinders (diameter ≈ 4.5 mm). Space them 15 mm apart along the 21 cm direction. Align them so rods sit flush with the top edge. Add corner bumps for stacking Place small rounded cubes (10 × 10 × 3 mm) on each top corner. Duplicate and invert them underneath for recesses. Smooth edges Use “Fillet” or “Chamfer” to soften corners for printing.
Modular Cube Frame 3D Model
rectangular photo frame 3d model: Create a clean 3D printable rectangular photo frame insert for an alphabet photo frame. Overall size: 70 mm height, 50 mm width, 6 mm total thickness. Make a smooth front photo window with rounded corners and one simple raised border, no multiple inner steps or extra layers. Back side must have a simple flat recessed pocket for the photo and a thin sliding back cover. The back cover should slide in from one side through a side opening. Use smooth 45-degree chamfered side guide channels/rails so it can print flat without supports. Avoid horizontal overhangs. Add a small rounded retaining bump, friction stop, or tiny end notch at the end of the slide path to stop the back cover becoming loose or falling out. Keep it simple and printable, not a complex latch. Smooth edges, clean geometry, minimum 1.5–2 mm wall thickness, STL-ready, no text, no decoration, no colour.
Rectangular Photo Frame 3D Model
photo frame 3d model: Create a 3D printable rectangular photo frame insert for an alphabet photo frame. Overall frame size: 70 mm height, 50 mm width, 6 mm total thickness/depth. Make a front photo window with raised border. The internal cutout should be layered from front to back: 3 mm front border/lip depth, 1 mm space for photo, and 2 mm rear sliding back cover channel. The back cover must slide in from one side through a side opening. Add a side opening/channel for a thin back cover plate to slide in and hold the photo. The sliding channel should use 45-degree angled/chamfered guide rails so the part can be FDM printed flat without supports. Do not use horizontal overhangs. Add a small latch/lock at the end of the sliding channel like the reference photo: a small bump/notch stop that clicks or holds the back cover so it does not fall out. Keep the latch simple, printable, and flexible enough for PLA/PETG. Make the design clean, strong, support-free, rounded edges, minimum 1.5–2 mm wall thickness, STL
Photo Frame 3D Model
oversized t-shirt 3d model: generate a 3d 360 rotating model of a white oversize tshirt in 4k | Measurement | Size | | -------------------------- | ---------------- | | Total Length (HPS to hem) | 28 in (71 cm) | | Chest Width (pit to pit) | 24 in (61 cm) | | Bottom Width | 24 in (61 cm) | | Shoulder Width | 22 in (56 cm) | | Sleeve Length | 10.5 in (27 cm) | | Sleeve Opening | 8.5 in (21.5 cm) | | Neck Width | 7 in (18 cm) | | Front Neck Drop | 3 in (7.5 cm) | | Back Neck Drop | 1 in (2.5 cm) | | Armhole Depth | 11.5 in (29 cm) | | Sleeve Height (cap height) | 8.5 in (21.5 cm) | | Side Seam Length | 18 in (46 cm) | | Hem Height | 1 in (2.5 cm) | | Collar Height | 0.9 in (2.3 cm) | | Collar Width | 1 in (2.5 cm) |
Oversized T-shirt 3D Model
camera 3d model: I want to create a model for camera having lens diameter 2.75 inches, the width and height of camera is 5 inches and 3.75 inches respectively. I want you to extrude it upto 3.25 inches and make it real looking
Camera 3D Model
storage cube 3d model: A square measuring 60cm in length, 30cm in width, and 30cm in height.
Storage Cube 3D Model
прямоугольная коробка 3d модель: создай прямоугольную коробку с хорошо продуманной крышкой которая будет открываться и закрываться размеры коробки:длина 10см ширина 5.7см и высота от крышки до пола 25мм так же ширина стенок должна быть не менее 3мм
Прямоугольная Коробка 3d Модель 3D Model
mounting bracket 3d model: mounting bracket with two through holes, dark gray oval base and cylindrical collar, dimensions 68 mm height, 36 mm width, 45 mm depth
Mounting Bracket 3D Model
access control pillar 3d model: tall white access control pillar with circular black display, dimensions show width 380 mm, depth 295 mm, height 1915 mm
Access Control Pillar 3D Model
metal hook 3d model: metallic hook-like lever with side profile; dimensions shown 28.5 mm tall, 14.0 mm width, 15.0 mm feature height, 2.0 mm thickness; gray metal
Metal Hook 3D Model
honeycomb fence panel 3d model: honeycomb mesh fence panel with stake, two-panel V-shaped gate, hexagonal grid, gray plastic-like finish, dimensions 160 mm width per panel, total height 350 mm, panel height 230 mm, stake length 120 mm, 5 mm frame thickness, PETG/ASA/PLA material
Honeycomb Fence Panel 3D Model
blue oval button 3d model: blue oval button with four holes and smooth edge; dimensions 12.0mm width, 8.0mm height; side and back views show mounting loop beneath
Blue Oval Button 3D Model
파란 버튼 3d 모델: blue plastic oval button with white cross-stitch thread, 12mm width and 2.3mm thickness
파란 버튼 3d 모델 3D Model
slatted wastebasket 3d model: slatted wastebasket with vertical bars, dual-compartment design, dark gray metal texture, dimensions 16 cm height, 15 cm length, 8 cm width
Slatted Wastebasket 3D Model
wooden crate 3d model: from the front the width is 500 mm, depth is 410 mm height is 120 mm. generalte lik ethis
Wooden Crate 3D Model
camera 3d model: Final Dimensions: Overall Height: 110 mm Overall Width: 72 mm Overall Depth: 50 mm Main Body Diameter: 60 mm
Camera 3D Model
tissue box 3d model: Create a 3D-printable tissue box as two separate parts: a hollow box body and a snap-fit base plate. Interior: exactly 21 cm long (X), 10 cm wide (Y), 8 cm tall (Z). Wall thickness: 2 mm. Outer nominal: 21.4×10.4×8.4 cm. Top face has a centered thin rectangular slot 13 cm long (X) × 1 cm wide (Y), edges filleted 0.5 mm. Outer side walls carry an embossed Y‑tessellation: repeating Y shapes (three arms 120° apart, arm length 5 mm, arm width 1.5 mm, central circle 2 mm dia), staggered grid 8 mm spacing, raised 1.2 mm outward with 0.5 mm fillet at base. Pattern wraps seamlessly around corners; inner walls remain flat and smooth. Top face smooth. Bottom open with an interior snap-fit groove 2 mm up from edge, 1 mm deep × 1 mm wide. Base plate: 21.4×10.4 cm, 2 mm thick. Top face has a raised snap-fit ridge 1 mm tall × 1 mm wide, inset 2 mm from all edges, to mate with groove. Bottom face smooth. All parts manifold, support-free when printed upright. No springs.
Tissue Box 3D Model