Dimensions 3D Models

Find the best Dimensions 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Overall Dimensions (realistic proportions):

Total height: 145 mm
Maximum width (front): 75 mm
Maximum depth (side): 75 mm
Neck outer diameter: 60 mm
Neck inner diameter (opening): 50 mm
Base diameter: 70 mm
Wall thickness: 3–4 mm (consistent overall)

General Shape Description:

Vertical container with a hybrid cylindrical and slightly square-rounded form
Upper body: straight vertical walls
Lower body: transitions into a subtle inward curve, then expands slightly toward the base
Overall silhouette: mostly straight with soft curvature near bottom
Fully symmetrical along vertical axis

Top / Neck Geometry:

Short cylindrical neck
Includes 3 continuous threading rings (for screw cap)
Threads are evenly spaced, clean, and wrap 360° around
Top rim slightly rounded (not sharp)
Lip thickness slightly thicker than body wall
Small ridge where neck meets main body

Body Geometry:

Front Face:

Large smooth central panel (label area)
Slightly concave (very subtle inward curvature)
No sharp edges

Anonymous1775818974

Anonymous1774246223

Transparent box viewable through my camera. 60 inches long, 26.6 inches wide and 18 inches high

Anonymous1776303798

корпус 38мм на 68мм с глубиной 20мм. тощина стенки 2мм отдельно крышка по размерам 38 на 68 у одной стенки сковозное отверстие 8мм

Anonymous1776252860

начерти крепёжную планку длинной 150 мм шириной 30 мм высотой 20 мм с продольным пропилом длинной 100 мм шириной 5 мм

Anonymous1776242273

faz um catão de visita com 11 cmaltura 7 cm largura e 2mm de perfundidade

Anonymous1776240894

Anonymous1776229001

Anonymous1776185848

Anonymous1776138178

"A rectangular box with dimensions 105mm x 75mm x 55mm. It has a curved cut-out handle on the front side. The box is open at the top, with a wall thickness of 2.5mm. Clean and simple geometry, ready for 3D printing."

Anonymous1750995043

Create an exact CAD-style 3D model in millimeters. Base: a solid cuboid of 7.74 × 7.74 × 3.12 mm. Each of the 4 vertical side faces (7.74 × 3.12 mm) contains a centered horizontal groove: 0.72 mm wide, 0.72 mm deep, running the full 7.74 mm length, centered at mid-height (1.56 mm from top/bottom). On each face, add a second groove: same dimensions (0.72 × 0.72 mm), vertical, centered horizontally, running full height (3.12 mm). This vertical groove intersects the horizontal groove at the exact center, forming a cross. All grooves are precise boolean cuts, fully symmetric, with sharp edges and no fillets. Output a clean, watertight solid model.

Anonymous1736005298

Create a precise CAD-style 3D model using millimeters as units.

Base shape:
- A solid rectangular block (cuboid)
- Dimensions: 7.74 mm (length) × 7.74 mm (width) × 3.12 mm (height)

Grooves on vertical side faces:
- There are 4 vertical side faces (each 7.74 mm × 3.12 mm)
- On EACH of these faces, create a centered horizontal groove:
- Groove width: 0.72 mm
- Groove depth: 0.72 mm
- The groove runs along the full 7.74 mm length
- The groove is centered vertically (mid-height of 3.12 mm)

Perpendicular grooves:
- On EACH side face, add a second groove:
- Same dimensions: 0.72 mm wide and 0.72 mm deep
- This groove runs vertically (along the 3.12 mm height)
- It is centered horizontally on the face
- It intersects the first groove at the exact center, forming a cross shape

Constraints:
- Grooves must be cleanly subtracted (boolean cut) from the solid
- All grooves must be centered and symmetrical
- Maintain sharp edges (no fillets or rounding)

Output:
- A clean, watert

Anonymous1736005298

A square of 7.74 mm by 7.74 mm and with a thickness of 3.12 mm. The thin sides need to have a horizontal indentation of 0.72 mm deep and 0.72 mm wide along the entire length of 7.74 mm. Perpendicular to that indentation, each side needs to have another indentation of 0.72 mm deep and 0.72 mm wide over the entire thickness of 3.12 mm, and which crosses the existing indentation in the middle.

Anonymous1736005298

Anonymous1775979450

Dimensions:

Outer diameter: 240 mm
Ring height (Z-axis): 10 mm
Wall thickness: 3 mm
Inner diameter: 234 mm (derived from thickness)

Japanese pattern on side

Anonymous1775901688

Anonymous1775759221

Realiza un rectangulo de 20 cm de largo por 60 mm de ancho y 60 de alto. Con 5 orifcios en la superficie de 10mm de ancho. ubicados de forma consecutiva y proporcional.
Los orificios deben tener un profundicas de 25mm.

Anonymous1768446411