Electronics enclosure 3D Models

Find the best Electronics enclosure 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

a case with a lid that is open in the middle for a 2.4lcd display,
in the case a esp32-u needs to be able to fit with a hole for the esp32-u antenna and a boxy look that fits in your hand

Anonymous1776460693

Anonymous1775910439

Anonymous1775867641

Anonymous1775853766

Anonymous1745289724

Anonymous1775689128

PROMPT:

Create a detailed 3D model of a rugged two-part electronics enclosure shown in an exploded view.

The design consists of:

A top lid (red)
A bottom base (black)
Top part (lid):
Rectangular shape
Dimensions: 200mm length, 120mm width, 25mm height
Smooth, completely closed top surface
Slight chamfered edges
Rounded corners (radius 6–8mm)
Screw holes:
4 holes in the corners
Diameter: 4.2mm (for M4 screws)
Countersunk (8mm diameter, 2–3mm depth)
Cable خروج (ONLY in top part):
Located on the right side
Recessed rectangular pocket:
approx. 30mm wide
18mm high
5–7mm deep
Inside the recess:
Two round holes Ø12–13mm
Center spacing: 10–12mm
Designed for thick 10mm² cables
Underside:
Inner lip around the entire perimeter
Lip depth: 5mm
Lip thickness: 2–3mm
Screw guide columns aligned with co

Anonymous1775602150

Make a device in which WAVESHARE Dedicated Cooling Fan for Jetson Nano, 5V, 3PIN Reverse-proof-16990 Dual USB Charging Module with LED Indicator and 3000mAh 3.7V Lithium-ion Rechargeable Battery with Wires & JST Connector — High-Capacity DIY Power Cell for RC Drones, Toys, LED Projects & Electronics (No BMS) are connected in a small box which also have small storage which c type holedar

Anonymous1775568538

Anonymous1775500123

Anonymous1775550970

A high-resolution 3D CAD render of a split-shell electronics enclosure for a medical device. The front panel is angled at 15 degrees and features two precise rectangular cutouts: a large one on top for a 16x2 LCD and a smaller square one below for a 0.96-inch OLED. The material is a matte grey 3D-printed PLA with visible but high-quality layer lines. The top shell is slightly lifted to reveal the internal layout containing an ESP32 microcontroller and a small EXG sensor module mounted on standoffs with neat wire management. Professional lighting, studio background, 8k resolution.

Anonymous1775213281

Anonymous1775276992

Anonymous1772880193

Anonymous1774862077

Photorealistic 3D product render, isometric view at 35° elevation,
studio lighting with soft shadows.

OBJECT: Electronic enclosure box, ABS plastic, matte dark gray
(RAL 7021 Black Gray), dimensions exactly 120mm wide × 80mm tall ×
65mm deep. IP65 sealed. Rounded corners radius 8mm all edges.

PCB INSIDE (visible through open lid or cutaway top view):
Green FR4 PCB, 118×78mm, dual-layer, white silkscreen text visible.

COMPONENTS on PCB, precisely positioned:

1. TOP-LEFT ZONE — HLK-LD2410 radar module: rectangular sub-PCB
35mm wide × 15mm tall × 3mm thick, mounted flat, dark green PCB,
3 small rectangular patch antennas (6mm×8mm each) spaced 14mm apart
in a row along the top edge, gold-colored copper traces visible.
White silkscreen: "HLK-LD2410". Positioned at x=10mm, y=8mm from
top-left PCB corner.

2. TOP-CENTER — TF-Luna LiDAR sensor: compact square module
35mm × 35mm × 21mm tall, dark blue housing, prominent circular
optical lens 14mm diameter centered on front face, lens

Anonymous1768786146

Anonymous1768068435

Anonymous1774277984

Design a compact two-piece electronics enclosure made entirely of plain plastic geometry.
CRITICAL — READ FIRST:

This model contains ONLY plastic parts. No PCBs, no electronic components, no circuits, no solder joints, no chips, no wires, no connectors, no metal parts of any kind are to be modeled or appear anywhere in the scene
The colored zones are simply flat colored plastic floor surfaces painted onto the base tray floor — they are just colored rectangles recessed 0.5mm into the floor surface to visually indicate where a real component will be placed later by hand
Do not model, imply, or suggest any electronic component in any way. If it has circuits on it, do not include it

Overall dimensions: 130mm (L) × 90mm (W) × 50mm (H), wall thickness 2mm, internal corners filleted 1mm, external corners filleted 2mm. Every part is plain grey plastic except the three colored floor zones.

BATTERY HOLDER DIMENSIONS — this drives the overall case width:

Exact size: 69.85mm (L) × 63.5mm (W) × 19.05mm (H) — converte

Anonymous1773951132