Floorstanding speaker 3D Models

Find the best Floorstanding speaker 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Anonymous1776326877

Anonymous1774984008

Ariel Tiker

Photorealistic high-end floorstanding loudspeaker, based on the attached dimension sheet and current render. Keep the lower woofer cabinet clean white. Keep two black woofers vertically aligned in the white cabinet, with metal spikes at the base.
The upper section must be corrected: it is not a rectangular closed box. It is an open-baffle top module for the tweeter and midrange only. The front baffle is birch plywood end-grain with visible laminated stripes, and it has left and right side wings that are 30 mm deep in the same birch end-grain material. Behind that front baffle, the top section remains visually open, not boxed in.
Place the AMT tweeter above the midrange on this birch open baffle. Maintain the proportions from the drawing: front width about 356 mm, total cabinet height about 866 mm, top baffle about 356 x 400 mm. Keep the driver spacing consistent with the drawing sheet.
Show the speaker in a refined studio/interior setting with soft natural light, concrete

Anonymous1771447861

Anonymous1772612777

Ultra realistic high-end floorstanding loudspeaker, modern minimalist design, inspired by high-end audiophile speakers.
Tall rectangular cabinet with slightly rounded edges, matte white finish.

Front layout:

one large woofer at the bottom (approx. 25–30 cm diameter)

above it three midrange drivers in a vertical line (smaller, approx. 10–12 cm)

one tweeter above them (small dome)

another midrange driver above the tweeter

one large mid-bass driver near the top

All drivers are black with glossy cones and visible rubber surrounds.
Drivers arranged vertically and perfectly centered.

Additional details:

bass reflex port at the bottom front of the speaker

cabinet proportions tall and slim (approx. 110–120 cm height, 20–25 cm width)

clean Scandinavian hi-fi design

no logos or branding

Material and rendering:

matte lacquered MDF cabinet

black anodized metal driver frames

realistic reflections and physically accurate materials

Model requirements:

clean topology suitable for real-time rendering

separa

Anonymous1773746090

Peter Arnold

Anonymous1768473463

Anonymous1760436367

Mariana Pazzinatto

Anonymous1769291019

Anonymous1765706801

Anonymous1760135848

Anonymous1762458050

https://audio-heritage.jp/TECHNICS/speaker/sb-7000.JPG

Anonymous1763951963

Anonymous1762314488

Create a high-quality 3D model of a self-standing speaker inspired by Audi’s design language, based on the attached sketch.
The form should have clean and premium surface transitions with subtle aerodynamic curves and sharp edge details inspired by Audi headlights.
Use a matte gray main body, black front speaker area, and white minimal base.
The overall look should feel modern, minimal, and luxurious, suitable for Audi Home Audio series.
Emphasize precise surface flow, balanced proportions, and elegant simplicity.

Anonymous1761860721