floorstanding speaker 3d model

Photorealistic high-end floorstanding loudspeaker, based on the attached dimension sheet and current render. Keep the lower woofer cabinet clean white. Keep two black woofers vertically aligned in the white cabinet, with metal spikes at the base. The upper section must be corrected: it is not a rectangular closed box. It is an open-baffle top module for the tweeter and midrange only. The front baffle is birch plywood end-grain with visible laminated stripes, and it has left and right side wings that are 30 mm deep in the same birch end-grain material. Behind that front baffle, the top section remains visually open, not boxed in. Place the AMT tweeter above the midrange on this birch open baffle. Maintain the proportions from the drawing: front width about 356 mm, total cabinet height about 866 mm, top baffle about 356 x 400 mm. Keep the driver spacing consistent with the drawing sheet. Show the speaker in a refined studio/interior setting with soft natural light, concrete