Spur gear 3D Models

Find the best Spur gear 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Create a spur gear with an outer diameter of 26 cm and 36 teeth. Add raised (embossed) numbers on the teeth: number each tooth sequentially from 1 to 36, with the numbers centered on each tooth and clearly readable. Make the gear a clean, realistic 3D model with sharp tooth geometry and an even finish.

Anonymous1758048085

Anonymous1769784932

Anonymous1769743542

Anonymous1768323538

Anonymous1768141185

Anonymous1764874792

Anonymous1750059387

Anonymous1766654621

Anonymous1755848649

Anonymous1764210994

Anonymous1765620870

Z108.27 Шестеренка средняя для мясорубки Bosch (d-66/22 мм, зуб. 41/9) зд модель

Anonymous1765477299

Anonymous1765338423

Anonymous1765185860

Anonymous1765118278

Anonymous1742411179

High-detail 3D model of a peripheral impeller wheel for a liquid pump. The wheel is flat and round, with a central hub and straight radial blades on both sides of the disk, evenly distributed around the circumference. Blades start at the center and extend outward to the outer perimeter. The impeller is symmetric relative to the mid-plane. At the center there is a cylindrical bore for a shaft, with two opposite flat key surfaces (double-flat shaft seat / two parallel key flats). Include a stepped inner hub with accurate concentric cylindrical surfaces. On the front face of the hub, place two threaded holes (M6-like) located symmetrically relative to the shaft axis, aligned parallel to the axis, positioned on a circular pitch around the center. Outer diameter around 126 mm, inner hub diameters around 19–34 mm in stepped form. The blades are narrow, straight, evenly spaced (around 32–36 blades), uniform thickness. Overall appearance: machined metal part, clean surfaces, precise engineering geometry, realistic li

Anonymous1761338029