Terrarium 3D Models

Find the best Terrarium 3D Models, free download in STL, FBX, GLB, OBJ, 3MF, USDZ for 3D modeling and creation in Blender, 3D printing, game developing, animation, eCommerce, AR/VR and etc. Generated by Tripo AI 3D Generator.

You May Also Like :

Anonymous1734967417

Create a highly detailed 3D model of a miniature white metal fairy garden arch arbor for a terrarium, total height exactly 15cm. The design features two thick vertical posts (4-5mm diameter) connected by a smooth arched top curve, with symmetrical decorative scrollwork swirls on both sides (elegant thick S-shaped curls, 4-5mm thick, extending inward from the posts for added strength). The base has a wide flat rectangular platform (about 8cm wide) at the bottom for stability when placed in soil. Style is ornate wrought iron look, painted white, with smooth clean surfaces and robust thick metal rods. High detail on curves and scrolls for 3D printing, single solid connected model, no loose parts, optimized for strength and durability.

Anonymous1764261912

Anonymous1763610746

Generate a SINGLE-PIECE, watertight (manifold) 3D model of a TWO-TIER terrarium hide for a leopard gecko (Eublepharis macularius) with a STRAIGHT, EASY-CLIMB RAMP (ladder-like tread pattern). No separate parts. Units in millimeters. Z-up. Orient flat on the build plate.

PRINTER ENVELOPE
- Entire model must fit inside 220 × 220 × 250 mm.
- Target outer footprint ≤ 205 × 160 mm; overall height 120–130 mm.

SMOOTH WALLS (critical)
- All exterior and interior walls must be SMOOTH (no rock noise, no micro-bump). Surface roughness amplitude ≤ 0.05–0.10 mm.
- Vertical walls planar and orthogonal: 90° ± 1° to the floor.
- All edges filleted (R = 3–6 mm outside, R = 2–4 mm inside). No sharp points.

FLAT INTERIOR FLOOR (critical)
- Interior floor perfectly flat, 0° slope, clear rectangle 165 × 115 mm.
- Floor Z = +5.0 mm above the external bottom (base thickness under floor = 5.0 mm).
- Apply a 0.3 mm × 45° anti-elephant-foot chamfer ONLY on the OUTER bottom perimeter (do NOT chamfer the interior floor).

OVERALL LAY

Anonymous1758315511

Generate a SINGLE-PIECE, watertight (manifold) 3D model of a TWO-TIER terrarium hide for a leopard gecko (Eublepharis macularius) with an INTEGRATED RAMP. No separate parts or removable lids. Units in millimeters. Z-up. Model oriented flat on the build plate. Style: natural sandstone/rock with soft undulations; safe, rounded geometry everywhere.

PRINTER ENVELOPE
- Must fit completely within 220 × 220 × 250 mm.
- Target overall envelope ≤ 208 × 208 × 140 mm to allow brim/margins.

OVERALL LAYOUT (single body)
- Footprint (outer base): 205 × 160 mm; overall height: 120–130 mm.
- Lower level: main hide cavity inside the base.
- Upper level: open lounging/observation deck.
- A continuous switchback/wrap-around ramp connects ground level to the upper deck.

FLAT INTERIOR FLOOR (strict requirement)
- Hide interior floor is perfectly flat (0° slope), rectangular area 165 × 115 mm.
- Interior floor Z-height = +5.0 mm from the external bottom (i.e., 5.0 mm base thickness under the floor).
- Add a 0.3 mm × 45° anti-el

Anonymous1758315511

Сгенерируй твердотельную, водонепроницаемую (manifold) 3D-модель двухуровневого домика-укрытия для эублефара (Eublepharis macularius) с подъемом/рампой. Масштаб в миллиметрах, ось Z — вверх, модель ориентирована на столе печати. Стиль: натуральный «скальный» камень с мягкой, неострой микротекстурой (для сцепления лап), без острых кромок.

ГАБАРИТЫ И КОМПОНОВКА
- Общий размер основания: ~220×140 мм; общая высота: ~120 мм.
- Нижний уровень — укрытие: внутренняя камера ~160×110×70 мм (Д×Ш×В).
- Вход арочный: ~55 мм ширина × 45 мм высота, кромки скруглить (филет 3–5 мм).
- Верхний уровень — площадка для отдыха/наблюдения: ~200×120 мм на высоте ~90 мм.
- Рампа с нижнего к верхнему уровню: ширина ≥60 мм, уклон 15–18°, поперечные неглубокие проступи (ребра) высотой 2–3 мм, шаг 10–12 мм; по бокам невысокие бортики ~5–8 мм.
- Вентиляция: на задней/боковых стенках ряды отверстий Ø3–4 мм с шагом ~15 мм (без острых кромок).
- Съемная крыша/крышка нижнего укрытия для уборки: крышка накрывает «колодцем», посадка без крепеж

Anonymous1758315511

Generate a solid, watertight (manifold) 3D model of a two-level terrarium hide for a leopard gecko (Eublepharis macularius) with a ramp. Use millimeters, Z-axis up, model oriented flat on the build plate. Style: natural “rock/sandstone” with a soft, non-sharp micro-texture for grip.

BUILD VOLUME
- The entire model (or each part if split) must fit within a 220 × 220 × 250 mm print volume. Target envelope ≤ 210 × 210 × 180 mm to allow slicer margins/brims.

OVERALL SIZE & LAYOUT
- Footprint (base): ~210 × 160 mm; overall height: ~120–130 mm.
- Lower level = main hide chamber: internal cavity ~160 × 110 × 70 mm (L × W × H).
- Entry arch: ~55 mm wide × 45 mm tall; all edges filleted (3–5 mm).
- Upper level = lounging/observation deck: ~200 × 120 mm at ~90 mm Z height.
- Ramp from lower to upper level: width ≥ 60 mm, slope 15–18°, shallow cross-rungs 2–3 mm high at 10–12 mm pitch; side curbs (guard rails) 5–8 mm tall.
- Ventilation: rows of Ø3–4 mm holes on rear/side walls, ~15 mm spacing, with softened edges.
-

Anonymous1758315511

Anonymous1737345196

Anonymous1748086924

Anonymous1714706045

Anonymous1749203984

[게임3D마스터]Sonson

Transform this flat 2D illustration into a detailed, three-dimensional style image

Brian Bai

Anonymous1769462790

Anonymous1714706045