ground vibration probe 3d model

A detailed, teA hyper-realistic 3D render of a cylindrical underground sensing device called “BeatRescue – Ground Vibration Probe (Node 1)”, shown in a vertical cutaway view. The device has a sleek matte gray outer casing, with the front half sliced open to clearly reveal internal components. At the top section, a small red status LED button is visible on the cap, alongside a black circular power/reset button on the side. Inside the upper compartment, a green cylindrical lithium battery is mounted horizontally. Below it sits a blue ESP32 microcontroller board, clearly labeled “ESP32”, with visible electronic components, pins, and a USB port at the bottom. Thin black wires connect the board to internal modules. The lower compartment contains an orange cylindrical vibration sensor module, connected via wiring to the ESP32. The device tapers into a conical pointed tip at the bottom, indicating it is designed to be embedded into the ground. On the exterior mid-section of the casing, a clean white label reads: