3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1773335976
03-12 19:34
Model Name
beehive 3d model
Tags
architecture
rendering
realistic
Prompt
A highly detailed photorealistic 3D model of a classic Langstroth beehive, natural pine wood, full assembly. BOTTOM BOARD: Slightly wider and deeper than the boxes (560x465mm), 22mm thick flat wooden board, front edge has a long narrow entrance slot gap (10mm tall, full width), two small removable wooden entrance reducer blocks sitting inside the entrance gap on left and right sides, slightly rounded front bottom edge. BROOD BOX 1 (first box from bottom, tallest): 510x415mm footprint, 248mm tall, 22mm thick solid pine walls on all four sides. Visible natural wood grain on all surfaces. Four vertical corner reinforcement strips (4mm thick) running full height on all four corners, slightly protruding outward. Inside the box: ten hanging wooden frames evenly spaced, each frame has a thick 22mm top bar resting on the box rim rabbet ledge, thin side bars, and a bottom bar. The frames hang parallel to the short walls. Top rim has a 10mm wide rabbet groove on inner edge for frame resting. BROOD BOX 2: Identical construction to Brood Box 1, stacked directly on top, same dimensions, same ten frames inside, same corner reinforcement strips, same wood grain detail. QUEEN EXCLUDER: Thin flat frame (510x415mm, 8mm thick) sitting between the two brood boxes and the honey super. Wooden outer frame with metal wire grid interior. Six evenly spaced horizontal parallel wire slots visible across the full inner area, each slot 4mm wide. HONEY SUPER: 510x415mm footprint, 168mm tall, same 22mm thick pine walls, same corner reinforcement strips. Shallower than brood boxes. Inside: ten shallow hanging frames, same top bar resting system. Stacked on top of queen excluder. INNER COVER: Flat wooden board exactly 510x415mm, 12mm thick, sits directly on top of honey super. Has a small rectangular ventilation hole (110x50mm) in the exact center, slightly raised wooden rim border around the top edge. OUTER TELESCOPING ROOF: Flat-top design, overhangs all sides by 25mm (560x465mm total footprint), 60mm tall side walls. Top surface clad with flat sheet metal, slightly raised above the wooden frame. Four drip edge trim strips on all four sides of the top plate, slightly angled outward. Corners are clean and square. Sits loosely over the inner cover. OVERALL SCENE: Full stack assembled in correct order bottom to top: bottom board, brood box 1, brood box 2, queen excluder, honey super, inner cover, outer roof. MATERIAL AND RENDER: Natural pine wood, warm honey-colored tone, visible wood grain on all surfaces, slightly weathered outdoor look, minor paint peeling on edges. Metal parts are brushed galvanized steel. Soft natural daylight from upper left. Three-quarter isometric view showing front-right face and top. White background. Photorealistic product render quality, 8K, sharp edges, high polygon detail.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1773335976
Anonymous1773335976