shipping container 3d model

Create a clean hard-surface 3D model of a modified 40-foot High Cube shipping container. DIMENSIONS: 40 ft long × 8 ft wide × 9.5 ft high (12.19 m × 2.44 m × 2.90 m). GEOMETRY: Realistic rectangular shipping container with straight corrugated metal side walls. Container elevated 60 cm above ground. Enclose the entire 60 cm gap underneath with flat concrete-sheet skirting around all four sides. Add 50 cm high rectangular bulkhead/fascia around the entire top perimeter. One horizontal sliding window on the center of each long side wall. Small straight projecting canopy above each window. Rear end wall has a rectangular opening for an exhaust fan. Remove the original double cargo doors completely. Replace the entrance end with a flat solid wall. Install one standard single entrance door centered on this wall. Door has one small rectangular glass viewing window. Small straight canopy above entrance door. Three concrete steps from ground level to entrance. Stair width exactly equal to entra