3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1779193008
05-19 12:55
Model Name
circular mounting plate 3d model
Tags
machine
3d printing
realistic
Prompt
Create a flat mounting base plate in millimeters. The shape is a circular main body blended into a rectangular extension on the right. The main body has an outer diameter of 106.50 mm. The total width from the leftmost edge to the rightmost edge is 108.25 mm. The right rectangular extension height is 87.13 mm. Use smooth tangent transitions between the circular body and the right rectangular extension. Add four main through holes, each Ø6.50 mm. Arrange them as a 60 mm × 60 mm rectangular bolt pattern, centered around the main body centerline. Each hole should have a circular boss or reinforced lobe around it, about Ø18–22 mm. The left two hole bosses should connect to curved inward cutouts, forming smooth C-shaped reliefs near the left side. Add four smaller auxiliary screw holes near the outer circular edge, approximately Ø3 mm through holes or M3 countersunk holes. Place them near the upper-left, upper-right, lower-left, and lower-right areas of the circular body, avoiding interfe
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1779193008
Anonymous1779193008