3D Workspace
Home
Assets
Affiliate Program
Creator Program
Sign up/Log in
View Plans
DCC Bridge
Anonymous1784051032
07-20 08:38
Model Name
square organizer tray 3d model
Tags
3d printing
3d printing realistic
compartments
furniture
furniture 3d printing
furniture 3d printing realistic
furniture realistic
realistic
tray
width
Prompt
Create a precise, functional, 3D-printable square organizer tray using the following measurements. Use millimetres as the only unit. OVERALL SIZE - Overall width: 152.4 mm - Overall depth: 152.4 mm - Overall height: 50.8 mm TRAY CONSTRUCTION - Outer wall thickness: 4 mm on all four sides - Bottom/base thickness: 4 mm - Open top - One vertical centre partition and one horizontal centre partition - Partition thickness: 4 mm - The two partitions must intersect at the exact centre - The partitions must be permanently joined to the base and outer walls - Total compartments: 4 equal compartments in a 2 × 2 arrangement COMPARTMENT SIZE - Clear internal opening of each compartment: approximately 70.2 mm × 70.2 mm - Internal usable depth from the compartment floor to the top edge: approximately 46.8 mm ROUNDED CORNERS - Outer vertical corner radius: R4 mm - Inside bottom fillet in every compartment: R6 mm - Exterior bottom-edge fillet: R3 mm - Top rim edge fillet: R1.5 mm - Corners should b
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1784051032
Anonymous1784051032Anonymous1784051032