3D Workspace
Home
Assets
Affiliate Program
Sign up/Log in
?
Upgrade
DCC Bridge
Anonymous1772319055
02-28 23:08
Model Name
rectangular block 3d model
Tags
machine
3d printing
realistic
Prompt
Create a rectangular block 60 mm wide, 10 mm deep, and 70 mm tall. On the front face, cut a centered square recess 42 mm × 42 mm × 2 mm deep for the motor body. Cut a centered shaft hole: A cylinder 6 mm diameter passing through the 10 mm depth. Cut a centered boss recess: A cylinder 22.4 mm diameter and 2.5 mm deep. Add four M3 mounting holes: Each hole is 3.4 mm diameter. Position them in a 31 mm × 31 mm square pattern centered on the shaft. Add two M5 mounting holes for attaching to the spine: Each hole is 5.5 mm diameter. Place them vertically 50 mm apart, 20 mm from the left edge. Add two triangular gussets on the sides: Each gusset is a right triangle 25 mm tall and 4 mm thick, placed at the rear corners for reinforcement.
Detailed Info
Related Models
Enter invite code
Enter invite code to get credits!
Anonymous1772319055
Anonymous1772319055